What we build every week.
Three product families, each with its own drawing conventions and its own failure modes. We know both.
Control boxes, cabinets and housings.
Flat or welded, indoor or outdoor, powder coated to your RAL. We build the shell, the door, the mounting plate and the gasket as one assembly — so the door still closes after coating.
| Material | CRS 1.5–3.0 mm · galvanized · 304 stainless |
| Protection | IP54 to IP66 with continuous gasket |
| Finish | Powder coat, RAL matched, 60–120 µm |
| Batch size | 25 – 300 pcs |
| Lead time | 15 – 18 days |
| Options | Flat-pack, assembled, hardware installed, silk screen |
Welded frames that stay square.
A frame that twists 3 mm is a frame that will not accept the panels. We jig-weld, check squareness before coating, and stress-relieve when the weld volume is high.
| Material | CRS 2.0–6.0 mm · galvanized · aluminum |
| Welding | MIG, TIG, spot; jig-fixtured |
| Squareness | ±0.5 mm per 500 mm (jig-welded) |
| Batch size | 10 – 200 pcs |
| Lead time | 18 – 22 days |
| Options | Machined mounting faces, inserts, lifting points |
Seams you cannot see.
On stainless, the finish is the product. We TIG weld, grind, blend and passivate, then inspect under raking light before packing. Coved corners and radiused edges are standard where hygiene matters.
| Material | 304 / 316L, 16–20 ga (1.2–1.5 mm) |
| Finish | #4 brushed, #8 mirror, 2B mill |
| Welding | TIG, blended, passivated |
| Batch size | 1 – 100 pcs |
| Lead time | 10 – 15 days |
| Options | Coved corners, concealed fasteners, NSF-style details |
Brackets, panels, covers, one-offs.
If it is flat, bent or welded, it is probably in scope. We take the small runs the big shops turn away.
Brackets & mounts
Laser cut and bent, 1–500 pcs. Hardware and inserts installed on request.
Panels & covers
Vented, louvered, hinged or fixed. Silk-screened labels and cutouts in the same pass.
Samples & one-offs
1 to 50 pcs, 7–10 days. Send a photo or a broken part — we will draw it and quote it.
One drawing is all it takes.
PDF, STEP, DXF or a photo. You get a price, a lead time and a DFM note within 24 hours on a complete drawing.